SMC Networks ASN2 Series, Operation Manual

Page: 8 / 9

- 7 -
3. Application
This product is designed to control the speed of a pneumatic actuator.
4. Specifications
WORKING FLUID AIR
WORKING PRESS.RANGE 0～1MPa
PROOF PRESS 1.5MPa
AMBIENI TEMP. AND WORKING FLUID TEMP. -5～60℃(NO FREEZING)
5
．
Troubleshooting
Trouble Possible cause Countermeasures
The speed (flow
rate) cannot be
controlled.
Dust inside
Fully open the needle and apply air blow
from the screw. If the problem in not
solved even after air blow, install an air
filter to the piping, and replace the
product with a new one.
6
．
Construction
ASN2-M5,U10/32 ASN2-01～04
ASN2-N01～N04
No. Description Material
1 Handle PBT
2 Needle Brass
3 Lock nut Steel wire
4 Needle guide Brass
5 Washer Steel
6 Cover PE
7 O ring NBR
8 Sponge PVA Sponge
9 Body B Brass
10 Gasket NBR/Stainless
Remarks
Electroless nickel plating
Electroless nickel plating
M5,U10/32
Electroless nickel plating