-45-
No.PF
※※
-OMA1007
○Wireless Network Configuration
The Air Management Hub can be configured to make a wireless network. Connecting a wireless adapter
(EXW1-A11N-X1) to the M8 "ADPTR" port of the AMS will allow wireless communication.
ADPTR port
Each of the AMS devices need to be set to pairing mode. Starting with DIP switch 4 of SW 1 in the OFF
position, perform the sequence ON >> OFF >> ON. The SF/MS/ST and BF/NS/SA LEDs of each device
will flash red.
Connect to the webserver. The available remote devices will appear in the "FREE REMOTE" section.
Using the
⇅
symbol, click and drag the remote devices up to the "SYSTEM CONFIGURATION" section.
Click "Write Configuration" to pair the devices and then set DIP switch 4 of SW 1 to OFF on the Air
Management Hub Base.
