![background image](http://html1.mh-extra.com/html/smc-networks/8724m-int-annexe-1/8724m-int-annexe-1_installation-manual_1300713060.webp)
T
ROUBLESHOOTING
A-4
Stack Troubleshooting
If a stack fails to initialize or function, first check the following items:
•
Check that all stacking cables are properly connected.
•
Check if any stacking cables appear damaged.
•
Check that the Master Select button is pressed in on only one unit in the
stack.
•
Check that each unit has the stacking ports enabled (the Stack button
pushed out).
•
Check that all switches in the stack are powered on.
After checking all items, reboot all the switches in the stack.
The switch allows you to configure ring- or line-topology stacking. When
using ring-topology stacking configuration and a switch fails, or a stacking
cable is disconnected, the entire stack reboots and resumes normal operation
and management using line-topology stacking through the remaining stack
connections. Also, any changes to the stack including powering down of a
unit or the insertion of a unit causes the stack to reboot.
Summary of Contents for 8724M INT - annexe 1
