![background image](http://html1.mh-extra.com/html/smc-networks/8724m-int-annexe-1/8724m-int-annexe-1_installation-manual_1300713037.webp)
3-1
C
HAPTER
3
I
NSTALLING
THE
S
WITCH
Selecting a Site
Switch units can be mounted in a standard 19-inch equipment rack or on a
flat surface. Be sure to follow the guidelines below when choosing a location.
•
The site should:
•
be at the center of all the devices you want to link and near a power
outlet.
•
be able to maintain its temperature within 0 to 40 °C (32 to 104 °F)
and its humidity within 5% to 95%, non-condensing
•
provide adequate space (approximately two inches) on all sides for
proper air flow
•
be accessible for installing, cabling and maintaining the devices
•
allow the status LEDs to be clearly visible
•
Make sure twisted-pair cable is always routed away from power lines,
fluorescent lighting fixtures and other sources of electrical interference,
such as radios and transmitters.
•
Make sure that the unit is connected to a separate grounded power outlet
that provides 100 to 240 VAC, 50 to 60 Hz, is within 2.44 m (8 feet) of
each device and is powered from an independent circuit breaker. As with
any equipment, using a filter or surge suppressor is recommended.
Summary of Contents for 8724M INT - annexe 1
