![background image](http://html1.mh-extra.com/html/smc-networks/8612t-annexe-1/8612t-annexe-1_management-manual_1300701077.webp)
P
ORT
C
ONFIGURATION
2-45
•
It can be configured as an LACP trunk port, but the switch does
not allow the LACP trunk to be enabled.
Note:
A port that is already configured as an LACP or static trunk
port cannot be enabled as a secure port.
Port Security Action
The switch allows you to set the security action to be taken when
a port intrusion is detected. This setting applies to all ports on the
switch.
•
Shutdown and Trap
— Indicates the action to be taken when
a port security violation is detected:
-
None
: Indicates that no action should be taken. (This is the
default.)
-
Trap and Shutdown
: Indicates that the port is to be disabled
and an SNMP trap message sent.
Web
– Click Port, Port Security Action. Specify the security action
for a port intrusion, then click Apply.
b_mgmt.book Page 45 Tuesday, July 8, 2003 5:24 PM
Summary of Contents for 8612T - annexe 1
