![background image](http://html1.mh-extra.com/html/smc-networks/8612t-annexe-1/8612t-annexe-1_management-manual_1300701147.webp)
M
ULTICAST
C
ONFIGURATION
2-115
•
IGMP Query Count
— Sets the maximum number of queries
issued for which there has been no response before the switch
takes action to drop a client from the multicast group. (Default:
2, Range: 2 - 10)
•
IGMP Query Interval
— Sets the frequency (in seconds) at
which the switch sends IGMP host-query messages. (Default:
125, Range: 60 - 125)
•
IGMP Report Delay
— Sets the time (in seconds) between
receiving an IGMP Report for an IP multicast address on a port
before the switch sends an IGMP Query out of that port and
removes the entry from its list. (Default: 10, Range: 5 - 30)
•
Query Timeout
— The time the switch waits after the previous
querier stops before it considers the router port (i.e., the
interface which had been receiving query packets) to have
expired. (Default: 300 seconds, Range: 300 - 500)
•
IGMP Version
— Sets the protocol version for compatibility
with other devices on the network. (Default: 2, Range: 1 - 2)
Notes: 1.
All systems on the subnet must support the same
version.
2.
Some attributes are only enabled for IGMPv2, including
IGMP Report Delay and IGMP Query Timeout.
b_mgmt.book Page 115 Tuesday, July 8, 2003 5:24 PM
Summary of Contents for 8612T - annexe 1
