![background image](http://html.mh-extra.com/html/smc-networks/8504t-fiche/8504t-fiche_user-manual_1300690009.webp)
C
ONFIGURATION
1. Connect to PC
RS-232 serial cable
Prepare a RS-232 serial cable. Attach the 9-pin female connector to the male connector on the
switch. Plug the other side of this cable to your PC.
2. Hyper Terminal
In Windows 95/98, launch “Hyper Terminal”, create a new connection, and adjust settings as:
l
19,200bps
l
8 Data bits
l
None Parity
l
1 Stop bits
l
None Flow control
Main Menu
Launch the new terminal you just set up, and then, turn on the switch. See the following
message for successful connection:
SMC 8504T (4-port gigabit) [ver: x.xx]
[ 0 ] Speed/ Duplex Setting
[ 1 ] Address Learn
[ 2 ] VLAN
[ 3 ] Queues Priority
[ 4 ] Trunk
[ 5 ] Uplink Port
[ 6 ] Monitor Port
[ 7 ] View Configuration
[ 8 ] Restore To Factory Default
Select: >>
Speed Mode
Input port number for which you want to configure, enter port number and select speed mode
l
Speed/ Duplex Setting
Which port? (1-4, E: Exit, A: Select all ports) …
l
Port setting
[ 1 ] Auto-negotiation
[ 2 ] 10 Half Duplex
[ 3 ] 10 Full Duplex
[ 4 ] 100 Half Duplex
[ 5 ] 100 Full Duplex
[ 6 ] 1000 Half Duplex
[ 7 ] 1000 Full Duplex