background image

C

OPYRIGHT 

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. 

However, no responsibility is assumed by SMC For its use, nor for any infringements of 

patents or other rights of third parties which may result from its use. No license is granted 

by implication or otherwise under any patent or patent right of SMC.  SMC reserves the 

right to change specifications at any time without notice. 

Copyright © 2000 by 

SMC Network, Inc. 

6 Hughes, Irvine, California 

all rights reserved. Printed in Taiwan 

 

T

RADEMARKS

 

SMC is a registered trademark; and EZ Switch is a trademark of SMC 

Networks, Inc. Other product and company names are trademarks or registered trademarks 

of their respective holders. 

 

L

IMITED LIFETIME WARRANTY 

Limited Warranty Statement: SMC Networks, Inc. ("SMC") warrants its products to be free from 

defects in workmanship and materials, under normal use and service, for the applicable warranty 

term. All SMC products carry a standard 90-day limited warranty from the date of purchase from 

SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product 

not operating as warranted with a similar or functionally equivalent product, during the 

applicable warranty term. SMC will endeavor to repair or replace any product returned under 

warranty within 30 days of receipt of the product.   

 

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by registering 

new products within 30 days of purchase from SMC or its Authorized Reseller. Registration can 

be accomplished via the enclosed product registration card or online via the SMC web site. 

Failure to register will not affect the standard limited warranty. The Limited Lifetime warranty 

covers a product during the Life of that Product, which is defined as the period of time during 

which the product is an 'Active' SMC product. A product is considered to be ‘Active’ while it is 

listed on the current SMC price list. As new technologies emerge, older technologies become 

obsolete and SMC will, at its discretion, replace an older product in its product line with one that 

incorporates these newer technologies. At that point, the obsolete product is discontinued and is 

no longer an 'Active' SMC product. A list of discontinued products with their respective dates of 

discontinuance can be found at 

http://www.smc.com/smc/pages_html/support.html.

 

 

All products that are replaced become the property of SMC. Replacement products may be either 

new or reconditioned. Any replaced or repaired product carries either a 30-day limited warranty 

Summary of Contents for 8504T FICHE



















Reviews: