![background image](http://html.mh-extra.com/html/smc-networks/8504t-fiche/8504t-fiche_user-manual_1300690015.webp)
RJ-45 Pin Assignments
Straight-Through Cable
RJ-45 Pin Assignments
Crossover Cable
End 1
End 2
End 1
End 2
1 (Tx+)
1 (Tx+)
1 (Tx+)
3 (Rx+)
2 (Tx-)
2 (Tx-)
2 (Tx-)
6 (Rx-)
3 (Rx+)
3 (Rx+)
3 (Rx+)
1 (Tx+)
6 (Rx-)
6 (Rx-)
6 (Rx-)
2 (Tx-)
Note:
This EZ-8504T can support Auto MDI/ MDI-X.
C
ONNECTIVITY
G
UIDELINES
Crossover/ Straight-Through Wiring Requirements
If the port on the
EZ Switch 1000 is…
And the port on the
other device is …
Then use … cable
Crossover (x)
Crossover
Crossover
Crossover (x)
Straight-through
Straight-through
Straight-through (=)
Crossover
Straight-through
Straight-through (=)
Straight-through
Crossover
Front-Panel LEDs
The front panel of the switch provides a link status LED for each RJ-45 port. In addition, the front
panel also contains status LEDs for “at-a’glance” system monitoring. The following table details
the functions of the various indicators:
Port and Switch Status LEDs
LEDs
Condition
Status
1000 Mbps
Green
Indicates that the port is operating at 1000 Mbps
100 Mbps
Green
Indicates that the port is operating at 100 Mbps
10 Mbps
Green
Indicates that the port is operating at 10 Mbps
Green
Indicates that the port is operating in full-duplex
mode
Fdx/ Col
Flashing Green Indicates a collision occurred on the port segment
when operating in half-duplex mode.
Act
(TX, RX)
Green
Indicate that the connection between port and
attached device is valid.
Front-Panel Ports
The front-panel ports are multi-speed RJ-45 ports with built-in wiring crossovers. PCs can be
connected to these ports with straight-through or crossover cable. Each port supports
Auto-Negotiation, so the optimum communication mode (half or full duplex) and data rate (10 Mbps,
100 Mbps or 1000 Mbps) are selected automatically.