![background image](http://html.mh-extra.com/html/smc-networks/8504t-fiche/8504t-fiche_user-manual_1300690010.webp)
Select: >> 1
l
Flow Control
Enable flow control? (Y/N)
After finish flow control selection
l
“Please Wait”
and configure another port or exit
3. Address Learning
Aging Control
A port’s MAC address register is cleared on power-up, or hardware reset. If this item is enabled,
the dynamically learned SA will be learned if it is not refreshed in less than the aging time.
l
Select “1”
Aging Control
[ E ] Enable
[ D ] Disable
Select: >>
l
Select “e”
Max address-aging timer
Max Aging time ( 1 – 10 minute) …
4. VLAN Setting
VLAN
Each port of the switch can be assigned to one or multiple VLANs (this device can be divided
into 4 VLANs maximum). Frames from the source port will only be forwarded to destination
ports within the same VLAN domain. A broadcast/ multicast frame will be forwarded to all
ports.
l
Select: >> 2
VLAN Group 1, assigned ports >>
[ S ] Port Select
[ D ] Port Delete
[ A ] Select All ports
[ C ] Save
[ E ] Exit
Select: >>
Queues Priority
The switch can support priority either from tagged frame or based on the input ports. This entry
is for port-based priority, level 0 stand for the lowest priority, level 7 as highest priority. Flow
control will be disable if priority level 7 was selected.
l
Select: >> 3
which port: (1-4, E: Exit) …
5. Trunk Setting
Trunk
This switch can assigned L2 Trunking automatically load-balances among its member ports
through the use of unique and statistical methods, and provides link resiliency (link-fail-over