Introduction
1-4
1
Figure 1-4 System LEDs
Table 1-1 Port Status LEDs
Label
Color
Description
Port 1-24
(Link/Activity/
Speed Mode)
On/Flashing Amber
Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
On/Flashing Green
Port has a valid link at 1000 Mbps. Flashing indicates activity.
Off
There is no valid link on the port.
Port 1-24
(PoE Mode)
On Amber
A PoE device is connected.
Off
No PoE device connected.
Port 21/22/23/
24
On Green
SFP transceiver plugged in.
Off
No SFP transceiver plugged in.
Port 25/26
On/Flashing Amber
Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
On/Flashing Green
Port has a valid link at 1000 Mbps. Flashing indicates activity.
Off
There is no valid link on the port.
Table 1-2 System Status LEDs
LED
Condition
Status
Power
On Green
Internal power is operating normally.
On Amber
Internal Power supply fault.
Flashing Amber
RPU failure.
Off
Power off or failure.
Diag
Flashing Amber
System diagnostic fail.
On Green
System diagnostic test OK.
On Amber
System diagnostic in progress.
Alternate Amber-
Green
Blink amber & green while booting.
PoE Status
On Green
Port LEDs display each port’s PoE Status
Flashing Green
The switch has reached or exceeded 95% of its power budget.
Amber
Indicates a thermal shutdown for the whole system.
Flashing Amber
Indicates a high temperature warning.
System LEDs
Summary of Contents for 8126PL2-F
