Interface Commands
4-123
4
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the base
value for displayed statistics to zero for the current management session.
However, if you log out and back into the management interface, the statistics
displayed will show the absolute value accumulated since the last power reset.
Example
The following example clears statistics on port 5.
show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status
[
interface
]
interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Always unit 1)
-
port
- Port number. (Range: 1-26/50)
•
port-channel
channel-id
(Range: 1-32)
•
vlan
vlan-id
(Range: 1-4094)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Displaying
Connection Status” on page 3-76.
Console#clear counters ethernet 1/5
Console#
Summary of Contents for 8126L2
