Interface Commands
4-117
4
Command Mode
Global Configuration
Example
To specify port 24, enter the following command:
description
This command adds a description to an interface. Use the
no
form to remove the
description.
Syntax
description
string
no description
string
- Comment or a description to help you remember what is attached
to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to port 24.
speed-duplex
This command configures the speed and duplex mode of a given interface when
autonegotiation is disabled. Use the
no
form to restore the default.
Syntax
speed-duplex
{
1000full
|
100full
|
100half
|
10full
|
10half
}
no speed-duplex
•
1000full
- Forces 1000 Mbps full-duplex operation
•
100full
- Forces 100 Mbps full-duplex operation
•
100half
- Forces 100 Mbps half-duplex operation
•
10full
- Forces 10 Mbps full-duplex operation
•
10half
- Forces 10 Mbps half-duplex operation
Console(config)#interface ethernet 1/24
Console(config-if)#
Console(config)#interface ethernet 1/24
Console(config-if)#description RD-SW#3
Console(config-if)#
Summary of Contents for 8126L2
