Command Line Interface
4-96
4
permit
,
deny
(MAC ACL)
This command adds a rule to a MAC ACL. The rule filters packets matching a
specified MAC source or destination address (i.e., physical layer address), or
Ethernet protocol type. Use the
no
form to remove a rule.
Syntax
[
no
]
{
permit
|
deny
}
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
[
vid
vid vid-bitmask
] [
ethertype
protocol
[
protocol
-
bitmask
]]
Note:
- The default is for Ethernet II packets.
[
no
]
{
permit
|
deny
}
tagged-eth2
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
[
vid
vid vid-bitmask
] [
ethertype
protocol
[
protocol
-
bitmask
]]
[
no
]
{
permit
|
deny
}
untagged-eth2
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
[
ethertype
protocol
[
protocol
-
bitmask
]]
[
no
]
{
permit
|
deny
}
tagged-802.3
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
[
vid
vid vid-bitmask
]
[
no
]
{
permit
|
deny
}
untagged-802.3
{
any
|
host
source
|
source address-bitmask
}
{
any
|
host
destination
|
destination address-bitmask
}
•
tagged-eth2
– Tagged Ethernet II packets.
•
untagged-eth2
– Untagged Ethernet II packets.
•
tagged-802.3
– Tagged Ethernet 802.3 packets.
•
untagged-802.3
– Untagged Ethernet 802.3 packets.
•
any
– Any MAC source or destination address.
•
host
– A specific MAC address.
•
source
– Source MAC address.
•
destination
– Destination MAC address range with bitmask.
•
address-bitmask
16
– Bitmask for MAC address (in hexidecimal format).
• vid – VLAN ID. (Range: 1-4093)
•
vid-bitmask –
VLAN bitmask. (Range: 1-4093)
•
protocol
– A specific Ethernet protocol number. (Range: 600-fff hex.)
•
protocol
-
bitmask
– Protocol bitmask. (Range: 600-fff hex.)
16. For all bitmasks, “1” means care and “0” means ignore.
Summary of Contents for 8126L2
