![background image](http://html1.mh-extra.com/html/smc-networks/7904brb3-fiche/7904brb3-fiche_user-manual_1300218034.webp)
SMC7904BR
B
3 User Manual
27
Label
Description
WAN IP Settings
Type The
choices
are
Fixed IP
and
Use DHCP
. If set
Fixed IP
, you should
enter the
Local IP Address
,
Remote IP Address
and
Subnet Mask
. If set
Use DHCP
, your Modem is a DHCP client, the WAN IP is assigned by the
remote DHCP server.
Local IP Address
This is the IP of WAN interface which is provided by your ISP.
Remote IP Address
This is the gateway IP which is provided by your ISP.
Subnet Mask
This is the Subnet Mask of the
Local IP Address
.
Unnumbered
Select this checkbox to enable IP Unnumbered function.
Default Route
Add
After configuring the parameters of this page, click this button then a new
PVC is added into
Current ATM VC Table
.
Modify
Select a PVC in the
Current ATM VC Table
, and then modify the
parameters of this PVC. When you finish, click this button to apply the
change of this PVC.
Delete
Select a PVC in the
Current ATM VC Table
, and then click this button to
delete this PVC.
Undo
Click this button to begin configuring this screen afresh.
ATM Setting
Click this button, the Fig 3.5.1-3 appears. In this page, you can configure
the QoS mode of ATM PVCs. For details, see the following pages.
Click this button, the following screens appears. In the page, you can
modify the parameters of PVCs.
If the PVC uses PPPoE mode, click
, the Fig 3.5.1-2 appears. In this page, you can configure the
parameters of this PPPoE PVC.
Fig 3.5.1-2