Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
47
100 mm. In order to maintain the electrical continuity of the system at the place of application of
the flexible connection, the aluminium profile of the device should be connected to the ventilation
duct with an ground wire of appropriate size (fig.11.10).
Fig. 11.10. Connection of ventilation ducts, connection of flexible ground wire.
The correct connection of the channels to the iSWAY-FC
®
, iSWAY-WFC
®
, iSWAY-RFC
®
unit
requires the use of appropriate support elements which will guarantee the appropriate load
capacity and stability of the structure. The method of conducting ducts and fittings connecting the
aeration unit with the aeration system should eliminate the possibility of generating noise from
elements of the system.
11.2.
iSWAY-WFC
®
The iSWAY-WFC
®
unit: wall-mounted. The product is delivered fully packed on a pallet. After
delivery to the installation site, the kit should be unwrapped and laid out into elements that should
be assembled on the wall in the following order.
1.
iSWAY
2.
Ground wire
3.
Flexible joint
4.
Ventilation duct
Detail A
