Version: 1.3
Date: 31.03.2022
Page 10 z 11
Operation and Maintenance Manual
CDH-F
5.
DISASSEMBLY OF THE ELECTRIC ACTUATOR
In order to disassembly the actuator:
- remove the safety pin with a strong pull,
- pull the pipe out of the actuator axis,
- remove the fixing screws of the actuator and remove the actuator from the axis.
Removing the cotter pin.
Pulling the pipe out of the actuator axis
In order to install the actuator:
- mount the actuator on the axis and screw the fixing screws in,
- put the pipe onto the actuator axis so that the tie rods on the both sides of the louver are synchronised,
- install the cotter pin.
Cotter pin