11
HARDWARE INSTALLATION cont’d
4) Install Remote Control onto dash next to the steering wheel
and within reach of the driver.
5) Run remote & camera cable(s) and secure in headliner or
other area so no cables are exposed. Use provided wire clips if
necessary. Cables should enter through rear of the locking case.
Make sure cables go
through this opening
6) Connect all cables to SVC400 Recorder (see pg 13 for
additional Rear camera & LCD configuration)
Camera 1 Input
Remote Control Input
GPS Input
Rear Camera
input (optional)
Camera 3 Input
(optional)
External Mic input
(optional)
Power Input &
Alarm trigger cables
Camera 2 Input
(optional)
LCD monitor
Connection
(optional)
SD card input (32GB)
