iSmartIMMO 801 User Manual
l
2
15
INS Cable V2
After removing the vehicle dashboard, connect
programmer, vehicle dashboard, and the cable.
1
16
MCU Cable V1
To connect the programmer and MCU.
1
17
Bench Mode
Cable
Connect the programmer and the engine to read
engine or gearbox ECU (Connect engine ECU with
the BENCH mode cable based on BENCH mode
diagram).
1
18
Matching Adapter
A
To connect the BENCH mode cable and gearbox
ECU/engine.
5
19
Matching Adapter
B
To connect the BENCH mode cable and gearbox
ECU/engine.
6
20
Matching Adapter
C
To connect the BENCH mode cable and gearbox
ECU/engine.
7
21
Matching Adapter
D
To connect the BENCH mode cable and gearbox
ECU/engine.
8
22
Matching Adapter
E
To connect the BENCH mode cable and gearbox
ECU/engine.
6
23
Switching Power
Supply
Supply power to the programmer.
1
24
Password
Envelope
A piece of paper bearing Product S/N and
Activation Code, which is required for your
registration.
1
25
User Manual
1
2 Overview
2.1 Introduction
iSmartIMMO 801, developed by
SHENZHEN SMARTSAFE TECH CO., LTD.
is
specially designed as a comprehens
ive immobilizer programmer. It can work
with the VCI (Vehicle Communication Interface) dongle to perform full car
models and full systems diagnosis (including reading/clearing the diagnostic
trouble codes and reading data stream etc.). Additionally, it also can work with
the iSmartIMMO G3 to
perform anti-theft matching and anti-theft programming
operations.