SmarTrunk Systems ST-9116C, Service Manual, Page: 34 / 67

ST-9116C SM R 1.1 SMARTRUNK SYSTEMS, INC. 34
6. COMPLIMENTARY USER
ALIGNMENT
The above parameters only can be
aligned under dealer login and most
of them should be critical for proper
repeater performance.
Additional
complimentary
parameters should be also aligned
on user login mode; it means the
user can align it as per the most
convenient way for particular
repeater usage.
6.1. TEMPERATURE CONTROL:
ST-9116
takes care of the
temperature of the device to protect
it in case of extreme conditions,
reducing the TX power or just
setting the repeater off-line in
extreme conditions.
To align the Max temperature
admitted for normal operation,
please select:
Max Temp [C]
option Alignment screen.
Figure 40: Max temperature control
Actual alignment value will be
displayed on alignment slider.
Press [Start] then move the slider to
reach the desired value.
As soon the desired value is
reached, press [Finish] to store the
value on repeater memory.
Typical
default alignment
correspond to a max temperature of
95° C in factory when the repeater
was calibrated.
If you want to retrieve factory
default, press [Factory] instead of
[Start]. You will be asked to confirm
the factory default alignment, and
then, if you confirm it, original
values from factory will be loaded
into current alignment settings.
6.2. FAN CONTROL:
ST-9116
takes care of the
temperature of the device to protect
it in case of extreme conditions,
reducing the TX power or just
setting the repeater off-line in
extreme conditions.
To help into the cooling process it
has a fan, which start to blow over
a
dangerous operating
temperature.
To align the temperature where the
fan start working, please select:
Fan On Temp [C]
option Alignment screen.