SmartRG SR300n User Manual Download

Page: 19 / 113

Route

Th e

Device Info -> Route

displays the LAN and WAN route table information configured in your SmartRG Gateway for both IPv4 and IPv6

implementation.

The individual fields on this screen are defined as follows:

Field Name

Description

Destination (Including IPv6 Route)

Displays the Destination IP addresses.

Gateway

Displays the Gateway IP address.

Subnet Mask

Displays the Subnet Masks.

Flag (Including IPv6 Route)

Displays the status of the flags.

Metric (Including IPv6 Route)

Displays the number of hops to reach the default gateway.

Service (Including IPv6 Route)

Displays the service type.

Interface (Including IPv6 Route)

Displays the WAN/LAN interface.

Next Hop (IPv6 Route only)

Displays the next hop IP address.

ARP

Device Info -> ARP displays

the host IP addresses and their hardware (MAC) addresses for each LAN Client connected to the SmartRG Gateway

via a LAN Ethernet port or Wireless LAN.

Summary of Contents for SR300n

















































































































Search results

Summary of Contents for SR300n

Reviews:

Related manuals for SR300n

Brands by name

Popular brands

SmartRG SR300n, User Manual

Search results

Summary of Contents for SR300n

Reviews:

Related manuals for SR300n

Brands by name

Popular brands