- 9 -
1-7-2 Setup-Procedure
The minimum requirement to operate SMARTPOWER 2L is to setup the IP Address,
subnet mask, and the gateway. The IP Search Utility program supports most Windows
Operating Systems (Windows NT4.0, 2000, 2003, XP, Vista).
There are two ways to perform the Setup-Procedure:
1. Open a web browser and input the default IP address. Then open the Network page
and input the information.
2. Use the IP Search Utility program (on the CD).
The default settings are:
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.1
Account name: admin (lower case)
Password: admin (lower case)
1. The workstation and SMARTPOWER 2L must be in the same LAN to perform the
Setup-Procedure.
2. The Windows Firewall must be turned off to operate the IP Search Utility program.
3. From the Start menu select the Control Panel.
4. Select the Windows Firewall.
5. Select Off and then click the OK button.
6. Put SMARTPOWER 2L
’s CD (provided) in the CD-ROM drive.
7. Launch the IP Search Utility program.
8. Click on the Refresh button to search for all of SMARTPOWER 2L
’s in the LAN. A list
of SMARTPOWER 2L will be displayed.
