1. INTRODUCTION
Thank you for selecting this Bluetooth headset
BHT-106R.
This
Bluetooth headset uses 2.4GHz Bluetooth technology for
communication – without the inconvenience of wires.
This Bluetooth headset is compatible with devices that support the
Bluetooth Headset and Hands-free profiles. To be able to use the headset
with a mobile phone, the phone needs to have build-in Bluetooth
technology, or a compatible Bluetooth phone adaptor.
2. KEY DIAGRAM
3. GETTING START
To use your headset, please follow these simple steps :
1. Charge
the
BHT-106R’
s
battery
2. Switch your headset
BHT-106R
on
3. Pair your headset
BHT-106R
with a Bluetooth Telephone
I. CHARGE YOUR HEADSET BATTERY
When the headset BHT-106R is on and the battery becomes low,
the LED will blink green color for 3 minutes to remind you the
headset needs to be recharged, at the moment , please use AC
charger to charge the battery immediately .
II. SWITCH YOUR HEADSET ON/OFF
turn on : press and hold Function Button simultaneously until LED
blinks red (approximate 7 seconds) ,then release .
turn off : press and hold Function Button simultaneously until LED
blinks green (approximate 2 seconds),then release .
III. PAIR YOUR HEADSET WITH A BLUETOOTH TELEPHONE
Prior to using your headset for the first time, you must pair it with
another Bluetooth device, such as a mobile telephone. The Bluetooth
connection between the headset and your phone can be established by
setting up a paired link. With a paired link , the phone remembers the
headset’s ID, and these 2 items are then paired together – eliminating
the need to repeat the setup process with future use. Only paired
devices can utilize Auto Answer and Auto-Transfer functions. The
information below describes pairing instructions for a typical device.
For specific instructions, refer to your mobile telephone user guide.
Function Button
LED
Earhook
Button
Volume -
Button
1. Function Button
－
Power on/off
2. Button
－
Volume Up
3. Volume- Button
－
Volume Down
½
Be able to curve
½
Earhook need to be
plugged into the hole
of earhook on the
back
