HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
12
of
68
4.2. LCD DISPLAY
4.2.1. MAIN DISPLAY
Main screen show pages; use
to scroll the screen.
★
Main Screen
, including as below,
Genset status, ATS status, Accumulator voltage, Accumulator temperature, Generator
Current, Accumulator Charge Current, Accumulator Discharge Current,
，
Load current
，
Engine speed
★
Accumulator Charging Curve Screen, including as below,
Charge Start Voltage
，
Const Charge Voltage
，
Charge Stop Voltage
，
Accumulator Voltage,
Accumulator Current
，
Charging Status
★
Engine 1#
, including as below,
Engine Speed, GOV/AVR, Engine Temperature, Engine Oil Pressure
★
Engine 1#
, including as below,
Liquid (Fuel) Level, Controller Voltage, Charger Voltage, Configure Analog 1
NOTE:
If connected with J1939 engine via CANBUS port, this page also includes: coolant
pressure, coolant level, fuel temperature, oil pressure, inlet temperature, exhaust temperature,
turbo pressure, total fuel consumption and so on.(different engine with different parameters)
★
Acc. Information, including as below,
Total Running Time, Total Start Times, Maintenance Due
★
Alarm
：
Display all of alarm information.
NOTE:
For ECU alarms and shutdown alarms, if the alarm information is displayed,
check engine according to it, otherwise, please check the manual of generator according to
SPN alarm code.
★
Press
can enter into menu interface to viewing the following items: event log;
input/output ports status; Issue time of software and hardware version; Time and Date
★
Event Log
, including as below,
Records all start/stop events (shutdown alarm, trip and stop alarm, manual /auto start or stop)
and the real time when alarm occurs.
4.2.2. PARAMETERS SETTING MENU
Parameters setting including as following,
★
Charge Settings
