Smartgen HAT833 Series Page 17 User Manual Download

Page: 17 / 55

HAT833 Series Three Power ATS Controller User Manual Page 18 of 56

The indication information will continuously display for 2s after it is active.

Table 15 – Indication Information

No.

Item

Description

Please Reset The
Alarm

When there is fault alarm occurs, the indication will be displayed when
change the genset mode to Auto Mode manually.

S1 Already Closed.

After S1 was already closed, the indication will be displayed when “S1
close (IOO)” button is pressed.

S2 Already Closed.

After S2 was already closed, the indication will be displayed when “S2
close (OIO)” button is pressed.

S3 Already Closed.

After S3 was already closed, the indication will be displayed when “S3
close (OOI)” button is pressed.

Panel Locked

The information displays when panel lock is active and keys are
pressed (Manual/Auto, IOO, OIO, OOI, OOO and Test keys).

Table 16 – Other Status Information

No.

Item

Description

Start Inhibit

Genset start Inhibit is active.

S1 Load Inhibit

S1 Load Inhibit input is active.

S2 Load Inhibit

S2 Load Inhibit input is active.

S3 Load Inhibit

S3 Load Inhibit input is active.

NEL 1 Trip

NEL1 off load signal is output.

NEL2 Trip

NEL2 off load signal is output.

NEL3 Trip

NEL3 off load signal is output.

Remote Gen On Load Remote start (on load) signal is active.

Remote Gen Off Load Remote start (off load) signal is active.

Gen Start Mains NG

Start genset when mains is abnormal.

Gen Start Master

Start when the gens supply and switching to highest priority.

Auto Mode

Current mode is Auto mode.

Manual Mode

Current mode is Manual mode.

Local Mode

Current mode is Local mode.

Summary of Contents for HAT833 Series
























































Search results

Summary of Contents for HAT833 Series

Reviews:

Related manuals for HAT833 Series

Brands by name

Popular brands

Smartgen HAT833 Series, User Manual

Search results

Summary of Contents for HAT833 Series

Reviews:

Related manuals for HAT833 Series

Brands by name

Popular brands