HAT700 SERIES ATS CONTROLLER USER MANUAL
HAT700 Series ATS Controller 2018-12-13 Version 1.5 Page 34 of 51
10 EVENT LOG
On the main screen press
key and select
Event log
, and then press
key again, the screen will
show the event log interface as follow:
After enter into the “Event Log” interface, press
/
to view records.
Action Event
10
/99
S1Genset Start
S1
Inactive
S2
Inactive
2014-09-12 16:57:26
Alarm type, number and total count.
Event Log
；
S1Power supply status
；
S2 Power supply status
；
Date and time
；
Press
to view the detailed record information; press it again to exit the current record.
Action Event 10/99
S1 Genset Start
S1
Inactive
S2
Normal
2014-09-12 16:57:26
Alarm type, number and total count.
Event Log
；
S1Power supply status
；
S2 Power supply status
；
Date and time
；
Press
/
to view the detailed record information; press it again to exit the current record.
Action Event 10/99
S1 Genset Start
U1LN 0 0 0V
U2LN 220 221 219V
F1 0.00Hz F2 0.00Hz
Alarm type, number and total count.
Event Log
；
S1 Phase Voltage
；
S2 Phase Voltage
；
S1 Frequency
，
S2 Frequency
；
Press
/
to view the detailed record information; press it again to exit the current record.
Action Event 10/99
S1 Genset Start
I 130 145 136A
TkW 220 PF 1.00
Alarm type, number and total count.
Event Log
；
Load Current
；
Active Power and Power Factor
；
Event log includes: event log type, event log, S1 power supply, S2 power supply, S1 3-phase voltage, S2
3-phase voltage, S1 frequency, S2 frequency, load current, active power, power factor and the record
date and time.
Event log type includes: Action Event, Warn Event and Fault Event. All fault event actions are fault alarm
while all warn event actions are warn alarm.
