HAT600N Series ATS Controller User Manual
HAT600N Series ATS Controller Version 1.1 2019-09-05 Page 15 of 24
Date& Time Set
1
0-06-25 (2) 10:00
1 Exit
2 Timing start cyc
3 Load set
4 Start time
5 Continue time
1
．
Simplified Chinese
2
．
English
9. TIMING START
In the main screen, press
key and select
3 Time start
, and then press
key, the screen will
show the time start interface as below:
Time start cycle
: includes inhibit start; single time, weekly or monthly.
Load set
: Starting generator with load or without load.
Start time
: Generator start date and time.
Continue time
: Generator continuously run time can be set on the duration of maximum time for 99
hours 59 minutes.
10. DATE AND TIME SETTING
In the main screen, press
key and select
4 Date & Time set
, and then press
key, the screen
will show the Date & Time Set interface as below:
Press
key and input corresponding bit values 0-9, press
key and make bit shift to right. At the
last bit press
key, so date and time can be updated.
Date and time format set: year-month-date (week) and hour: minute.
11. LANGUAGE SETTING
In the main screen, press
key and select
5 Language
, press
again to enter into language
setting interface and the screen will show the language interface as follow:
Press
to select the language and press
to confirm the setting.
Language option
：
Simplified Chinese/ English
