Smarteye Digital Electronics SER-2A Series User Manual Download Page 84

Page: 84 / 117

Digital Video Recorder User Manual

Step6

：

Run Scam program. It will enter a function interface.

Live view:

to do mobile live view

Image view:

to check the pictures snapped in live view

System setting:

Help:

function indication and help

Step7

：

Click System setting--->Login Setting to enter login interface.

Step8

：

Input the server’s address, ID and password respectively. Then save.

Notice

: About Access point, there may be different access points in different countries or from service providers.

Step9

：

Enter Live View, it will connect the server and display pictures.

Notice

: User name and password here are the same with that used on the DVR. The default is admin and 123456.

Step10

：

In Live View, users can do snapshot, change channels and control PTZ.

Summary of Contents for SER-2A Series





















































































































Search results

Summary of Contents for SER-2A Series

Reviews:

Smarteye Digital Electronics SER-2A Series, User Manual, Page: 84 / 117

Search results

Summary of Contents for SER-2A Series

Reviews: