2013 Compacta International, Ltd. - Rev.
5/2013
ZBMLC15
and Smartenit are trademarks of Compacta International, Ltd.
ZigBee is a registered trademark of the ZigBee Alliance
Your ZBMLC15 contains one relay (15Amp
@ 120VAC or 10Amp @ 240VAC) capable
of monitoring the energy consumption and
switching medium power AC loads.
Its compact size allows it to be placed inside a
standard, single-gang, outlet box, thus
providing intelligent control to a regular AC
outlet.
An input range from 95-277VAC, 47-63 Hz,
allows the device to be operated anywhere in
the world.
1) Factory Reset
Press and hold the Program Button for 15 seconds, until the LED begins to flash rapidly, then release. Proceed with Join
Network procedure to join to a ZigBee HA network.
2) Join Network
Open a ZigBee HA router or coordinator to permit joining of your ZBMLC15 to the network. The Status LED will be lit
solid when your ZBMLC15 has successfully joined the network.
Binding (or Unbinding)
To bind the ZBMLC15 to a ZigBee controller, press the Program Button for 3 seconds on the ZBMLC15. The Status
LED will flash once.
Press the Program Button on the client device(such as a switch) according to the instructions of that device.
The Status LED will be lit solid when a device has been bound to the ZBMLC15 and there is communication between
the ZBMLC15 and the coordinator. If binding was unsuccessful, the Status LED on the ZBMLC15 will flash 10 times.
•
•
•
The ZBMLC15 must be installed indoors or in a weather proof enclosure.
Description of wires:
-
Line 1 In
- Connects to 120V AC (or one leg of 240+VAC installations)
-
Line 2 In
(Neutral) - One blue wire will connect to the neutral wire
(or other leg of 240+VAC) from the electric service and the other blue
wire will connect to the neutral wire (or other leg for 240VAC) of the
appliance.
-
N/O to Load
- Connects to the “load” or “hot” side of the receptacle(s)
or fixture(s).
It is always recommended that working with electrity be handled by a
qualified electrician.
(949) 429-3303
Technical Support
Smartenit.com
Quick Start Guide
- ZBMLC15
Product Brief
Installation
Set-up
For more information, please visit our Wiki
http://wiki.smartenit.com
Wireless Metering 15A Load Controller
- Model #4034A
Status LED
Line 2 In
(Neutral)
N/O to Load
Line 1 In
Program Button
