Smarteh MX (V2) Series, User Manual

Page: 17 / 45

Chapter 2
Using basic features
smarttech.com/kb/171554 xvii
No. Name Procedure
5
Volume decrease Press to turn down the volume (see Adjusting the
volume on page xxiii).
6
Volume increase Press to turn up the volume (see Adjusting the
volume on page xxiii).
7 Power Press to wake the display (see Waking up the
display and putting it back in to an energy saving
mode
on page xv).
Press again to enter an energy saving mode (see
Waking up the display and putting it back in to an
energy saving mode
on page xv).
Using the remote control
The SMART product comes with one of two infrared remote control models. These models are similar,
except one has a screen sharing button.
Use the infrared remote control to turn the SMART product on or off, change the input source, change the
volume, access the SMART product’s iQ apps, and more. You can also use the remote control to open the
on-screen menus and change the SMART product’s settings.
IMPORTANT
l
Do not subject the remote control to strong shock.
l
Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l
Do not expose the remote control to heat or steam.
l
Do not open any part of the remote control other than the battery compartment.
The image and table below list the remote control’s functions.