49
SMARTEK Vision | User Manual
– LED Strobe Controller Family | Doc. v2.2.1
7.9. Lightheads (IPSC-series only)
To access the light heads options, click on the Light heads tab.
Figure 37: ScLibClient - Configure Light head
By using the Auto Detect button additional information is provided about the currently connected
light heads. Only the light heads with digital light head signature can provide additional
information. Digital light head signature is an optional feature. If digital light head signature
exists, Vendor, Model, Serial Number and Unique ID are read out. While connecting custom
illumination, be careful with limitations of LEDs. Bad settings can permanently damage the
illumination.
7.9.1.
Digital EEPROM Lighthead Signature
Digital EEPROM light head signature or Digital ID (DID) is a feature which is used for protecting
the light heads from damaging and provides additional information about the light heads.
Currents driven through LEDs exceeding the specifications can damage LEDs. Digital light
head signature is stored on the EEPROM of the light head and is accessed through IPSC
controller over 1-Wire protocol.
Figure 38: Digital ID Interface for Lighthead Coding
EEPROM that is supported by the IPSCx series is Dallas, Maxim DS2433 4Kb 1-Wire
EEPROM. The light head can be with or without digital light head signature/EEPROM.
Digital light head signature of the lighting device is accessed by pressing the F4 key on
keyboard. In the Digital Lighthead Signature window, additional information about strobe
controller and light head is provided.
