CHAPTER 1
WELCOME
5
No.
Name
Procedure
1
USB Type-A connector
Connect USB drives and other devices that
you want to use with the currently selected
input source.
2
USB Type-A connector
Connect USB drives and other devices that
you want to use with the e³ experience.
3
USB Type-B connector
Connect a USB cable to the display and
computer to provide touch control of the
computer connected to HDMI 3.
4
HDMI 3 input connector
Connect a computer or other input source to
the display (see page 11).
Front control panel
The front control panel contains the Power, Input Select, Menu,
Freeze, Mute and volume control buttons.
No.
Name
SMART Board MX100 procedure
1
Power
Press to wake the display.
Press to again enter Sleep mode.
2
Input select
Press to switch input source.
3
Menu
Open the e³ experience and the display’s
settings
.
4
Freeze
Press to start drawing an acetate. See
5
Mute
Press to mute or unmute the volume.
6
Volume decrease
Press to turn down the volume.
7
Volume increase
Press to turn up the volume.
