C H A P T E R 2
Installing your projector
14
smarttech.com/kb/170295
Routing the cables
Follow these instructions to route and secure the cables to the wall.
To connect the cables
1. Route the cables through the top of the boom and down its length before you connect them to the
projector.
2. Connect all the cables to the projector and let them hang loose.
N O T E
See
on page 16 for more information.
3. After you’ve connected all the cables, connect the power cable to a power outlet.
4. Turn on your projector so you can see where the projected image falls
5. Align the image and make other image adjustments necessary before you route the cables
around the projected image.
