SMART LightRaise 60wi, User Manual

Page: 56 / 108

C H A P T E R 6
Maintaining your interactive projector
48 smarttech.com/kb/170295
Replacing the projector lamp module
Eventually the lamp will dim and a message will appear reminding you to replace it. Make sure you
have a replacement lamp module before proceeding with the following instructions. You also need a
Phillips No. 1 screwdriver to complete these procedures.
W A R N I N G
l
See smarttech.com/compliance for the projector’s material safety data sheet (MSDS)
documents.
l
Replace the lamp module when the projector becomes dim or displays its lamp life warning
message. If you continue to use the projector after this message appears, the lamp can
shatter or burst, scattering glass throughout the projector.
l
If the lamp shatters or bursts, leave the room. Ventilate the area by opening windows and
doors.
Next, do the following:
o
Avoid touching the glass fragments because they can cause injury.
o
Wash your hands thoroughly if you have come into contact with lamp debris.
o
Thoroughly clean the area around the projector, and discard any edible items placed in
that area because they could be contaminated.
o
Call your authorized SMART reseller for instructions. Do not attempt to replace the lamp.
l
Replacing the lamp module in a wall-mounted projector can result in a fall or injury. Use
caution when climbing a ladder, and consider removing the projector from the wall-mount
bracket to replace the lamp module.
l
Uncovering the lamp while the projector is mounted on the wall-mount bracket can lead to
product damage or personal injury from falling pieces of glass if the lamp is broken.