SMART fortwo 2015, Owner'S Manual, Page: 129 / 228

You can change the distance unit in the
Dis‐
play
submenu ( Y page 129).
Coolant temperature menu
Under normal operating conditions and with
the specified coolant level, the coolant tem-
perature may rise to 110
†
.
Example: coolant temperature
X
Press the
9
or
:
button on the steer-
ing wheel to select the coolant temperature
display.
The display shows the current coolant tem-
perature as a bar in the range between 50
and 110
†
.
If the coolant temperature rises above
110
†
, then the display shows a display
message ( Y page 143). Observe the display
message. You could otherwise damage the
engine.
You can change the temperature unit in the
Display
submenu ( Y page 130).
Messages and service menu
Example: messages and service
If you have hidden display messages these are
saved in the message memory. The menu shows
the number of display messages in message
memory
:
and next service due date
;
( Y page 175). The message memory can only be
called up when the ignition is switched on.
X
Press the
9
or
:
button on the steer-
ing wheel to select the
Messages and ser‐
vice
menu.
The display shows the number of display
messages in the message memory and the
next service due date.
If there are no display messages, then the
value in brackets is 0 and the information
on the
a
button is hidden.
X
To show display messages: press the
a
button on the steering wheel.
The lower area on the right of the display
shows the display message, its list number
and then number of display messages in the
message memory.
X
Press
9
to scroll through the display
messages in the message memory.
Pressing
:
only allows you to scroll
back to messages which have already been
read.
If you scroll back from the first display
message using
:
, the
Messages and
service
menu will again be shown in the
display. Existing display messages are not
shown.
Settings menu
Introduction
In the
Settings
menu, as well as in its sub-
menus, a navigation bar is also shown at the
top of the display field. The navigation bar
serves for quick orientation and shows the
navigation path to the current selection
shown in the display (submenu/function). The
selection shown in the display is highlighted
in the navigation path.
Depending on the vehicle equipment, you can
call up the following submenus in the
Set‐
tings
menu:
R
Time
submenu ( Y page 128)
Menus and submenus
127
>> On-board computer and displays
.
Z