General safety instructions
Important!
If the door is closed when starting up or changing the battery without inserting the battery, the
door cannot be opened via radio signals: it is necessary to break the door open.
Follow the exact instructions for installation and start-up of the radio systems and replacement of
the batteries. Remove the flat battery and to prevent a malfunction,
wait at least 30 seconds
before inserting a new battery.
Observe correct polarity
(+/-)
at the battery case and the battery
itself.
Important!
During installation of the lock and strike plate, ensure that the door is not pre-stressed and
stresses are not transferred to the locking system. There is a risk that the latch can no longer
open malfunction.
Avoid doors which are pre-loaded with a rubber profile.
Authorised opening of an electronic lock in wooden furniture with an encoded chip. This chip can
be in the form of an ID-card (cheque card format) or key fob. Function of the lock is only warran-
ted when mounted on not conductive materials (wood, plastic). The max. thickness of the material
must not exceed
20 mm.
If used with higher material thickness or metal doors or doors with metal
coatings an external antenna must be used.
Use of the lock in explosive environments. Use of the lock outside of the stipulated specifications.
For damage resulting from incorrect use the customer bears sole responsibility, the manufacturer
accepts no liability whatsoever.
Any type of modification to the ELS Premium is not permitted.
The electromagnetic conduct of the ELS Premium may be impaired by additions or modifications
of any kind.
Therefore do not carry out any modifications or additions to electric/electronic components.
The use of replacement parts from third-party manufacturers may lead to dangers. Use only
original parts or parts approved by the manufacturer.
Intended use
Forseeable misuse
Important!
The user’s manual must be accessible for operators.
In addition, general and local regulations on accident
prevention and environmental protection are to be ob-
served.
Conversions or modifications
Replacement and wear parts and process materials
Mechanical specification
Weight per set
Complete set 142 Gramm
Electrical specifications
Equipment class as per
Directive 1999/5/EC
Class 2
HF radiation output
max. 66 dBµA/m at 10m
Frequency band
119 to 135 kHz
Battery type
CR 123A 3V
Ambient conditions
Operating temperature
+5°C to +35°C (41°F to 95°F)
Relative humidity operation
20% to 75%
(not condensing)
Danger!
The electronics of the ELS Premium contains a lithium-ion battery.
Dispose of this battery in accordance with national regulations.
When disposing of partly discharged batteries, ensure that no accidental short circuits can occur
between the poles of the battery (for example due to key fob in pocket of clothing…): danger of
explosion and fire.
Fasten the partly discharged battery for transport using non-conductive adhesive film in such a
way that no short-circuits can occur.
Important!
Separate electronics of the ELS Premium from the other parts and dispose of in accordance with
local regulations and directives.
Warranty conditions
This product was designed and manufactured carefully. At the moment of purchase the warranty
amounts 12 months for material and manufacturing failures. The warranty starts with the date of
purchase for 12 months. The product can be exchanged prior to certification of the proof of pur-
chase. The warranty conditions are limited to costfree exchange of the product or repair. Costs
and risks caused by transport, installation or de-installation of the product and all other costs
caused by the repairing will not be compensated. Liability for consequential loss—no matter which
type—are strictly excluded.
Technical specifications of the ELS Premium
Disposal
The user undertakes only to allow persons to work with the ELS Premium who:
•
have been instructed in working with the ELS Premium
•
have read and understood this user’s manual.
The lock is equipped with a 3V battery, which guarantees up to 20,000 openings. The battery
level is automatically checked if no opening by radio signal has taken place within 30 days.
If the battery level is low or the 20,000 openings have been exceeded, the necessary battery
replacement is indicated by an audible signal. Under certain circumstances, the signal may last
for several days, in which case automatic unlocking of the lock takes place.
The ELS Premium is a compact, wireless furniture lock for cupboards and drawers. It is opened
with an electric motor, when closed the system locks itself. Contactless chip technology is used
as the “key”. The system is “woken up” and opened by contactless identification via an author-
ised ID medium on the door.
The ID medium is simple to programme or delete. The installation of the lock with the spring-
powered door opener is possible without drilling holes in the piece of furniture.
Authorised opening of an electronic lock in wooden furniture with an encoded chip (= ID me-
dium). This chip can be in the form of an ID-card (cheque card format) or key fob.
Obligation of the user
Warning signals of the ELS Premium
Aim of the ELS Premium
Functional description
Installation– and
Usermanual
RFID locking system
ELS Premium
