CHAPTER 3
CONNECTING COMPUTERS AND OTHER DEVICES
28
Input source
USB 3.0 Type-A receptacle on the
side connector panel
USB 2.0 Type-A receptacle on the
front connector panel
HDMI 2
(SuperSpeed)
(Hi-Speed)
HDMI 3
(SuperSpeed)
(Hi-Speed)
VGA
(SuperSpeed)
(Hi-Speed)
Accessory slot
(SuperSpeed)
(Hi-Speed)
OPS PC
(SuperSpeed)
(Hi-Speed)
NOTE
If a SMART OPS PC module is installed in the accessory slot,
you can connect USB drives, peripherals, and other devices
to the USB 2.0 Type-A, USB 3.0 Type-B, and USB Type-C
receptacles on the OPS PC module to access those devices
from the OPC PC module input.
Connecting an external display
You can connect an external display using the HDMI 2.0 out connector
on the connector panel (pictured). The external display will show the
same image. This is useful when you’re using the display in an
auditorium or other large space where it would be beneficial to have a
second display.
IMPORTANT
If the connected external display doesn’t support HDCP, the image on the external display is
limited to 480p resolution. For full resolution output, connect a display that supports HDCP.
