SMART UF65 projector
Video mode
Aspect ratio
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Color signal
(MHz)
NTSC
4:3
15.73
29.96
3.58
PAL
4:3
15.62
25
4.43
SECAM
4:3
15.62
25
4.25 (f
ob
)
4.06 (f
or
)
SMART UF55w projector
Video mode
Aspect ratio
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Color signal
(MHz)
NTSC
4:3
15.73
59.94
3.58
PAL
4:3
15.63
50
4.43
SECAM
4:3
15.63
50
4.25 and 4.41
PAL-M
4:3
15.73
59.94
3.58
PAL-N
4:3
15.63
50
3.58
PAL-60
4:3
15.73
59.94
4.43
NTSC 4.43
4:3
15.73
59.94
4.43
Connecting peripheral sources and outputs
Follow these instructions if you have a peripheral device to connect to your interactive whiteboard
system, such as a DVD/Blu-ray player or a USB device.
N
N O T E S
l
Measure the distance between the projector and the peripheral device you want to connect.
Make sure each cable is long enough, has plenty of slack and can be placed safely in your
room without presenting a trip hazard.
l
Do not disconnect cables from the ECP to connect peripheral devices because you could
disconnect controls for your interactive whiteboard.
l
Don’t connect SMART Board Audio (SBA-L) USB speakers to the ECP. Connect these
speakers to the projector using a dual-channel (left and right) RCA plugs-to-3.5 mm audio
connector cable (included with the speakers).
l
The composite video connector and associated dual channel audio inputs on the ECP are for
input only. These RCA jacks don’t provide an output signal.
C H A P T E R 4
Integrating other devices
31
