SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
58
Field Name
Description
Source Port (port
or port:port)
Set the outgoing host port (or range of ports) for the above host (or range of hosts defined by
optional routing "/prefix" subnet mask) to define the ports profile for which egress traffic will
be filtered from reaching the specified destination(s).
Destination IP
address
Enter the destination IP address of a LAN side host for which you wish to filter/block outgoing
traffic for the specified protocol(s).
Note:
The address specified here can be a particular address or a block of IP address on a given
network subnet. This is done through appending the address with the routing " /prefix " length
decimal value (preceded with the slash) associated. A valid decimal routing prefix is required
for defining the subnet mask per CIDR notation.
Destination Port
(port or port:port)
Set the destination host port (or range of ports) for the above host (or range of hosts) to define
the destination port profile for which the filtered host egress traffic will be filtered from reach-
ing the otherwise intended destination(s), e.g., to block the traffic to those ports on, say, a com-
puter external to the local network.
MAC Filtering
Your SmartRG gateway can block or forward packets based on the originating device. This MAC filtering feature is available only in
Bridge mode. For other modes, similar functionality is available via IP Filtering. On this page, you can manage MAC filtering for your
gateway.
