SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
109
Field Name
Description
Current Network Key
(
Appears when
WEP Encryption
is set to
Enabled
) Select which of the four keys is presently in effect.
Network Key 1-4
(
Appears when
WEP Encryption
is set to
Enabled
) Enter up to four encryption keys using the on-screen
instructions to achieve the desired security strength (128-bit or 64-bit).
WPA2 and Mixed WPA2/WPA Network Authentication
The same configuration fields apply for both WPA2 and Mixed WPA2/WPA authentication methods.
1. On the Wireless > Security page, select
WPA2
or
Mixed WPA2/WPA
in the
Network Authentication
field. The following fields
appear.
Note:
For SR515ac models, go to the Wireless > 2.4 Ghz Band or 5 Ghz Band> pages.
2. Fill in the fields, using the information in the field description table below.
3. Click
Apply/Save
to save the settings.
The fields on this page are explained in the following table.
Field Name
Description
Select SSID
Select the SSID of the wireless network to which this security configuration will apply.
Protected Man-
agement Frames
(
Available for SR515ac models only
) Select whether to enable this option. Options are
Enabled
and
Disabled
. The default is
Disabled
.
WPA2 Preau-
thentication
Select whether clients can pre-authenticate with the gateway while still connected to
another AP. Options are
Enabled
and
Disabled
.
