2000i-DVS Installation Guide
23
8. Test the orientation by dragging your finger across the screen. The cursor should track your
finger very closely and appear directly beneath the center of your fingertip.
Calibrating the Cameras (DViT Technology)
With DViT technology, small cameras that are located in the corners of the interactive whiteboard
frame detect contact with the screen. For the screen to function properly, these cameras must be
precisely calibrated so the computer can provide an accurate and appropriate response to screen
contact.
You should re-calibrate the cameras (and orient the screen) if areas of the screen have inaccurate,
erratic or absent touch sensitivity, or if the electronic ink that appears when you write on the screen is
jagged, broken or doesn't appear at all.
To calibrate the cameras and orient the screen, access the
Advanced settings
of the SMART Board
Control Panel on a computer running the Windows 98, 2000, ME, XP or Windows NT operating
system, as described in the following procedure.
To re-calibrate the cameras
1. Press the
SMART Board
icon in the system tray, and select
Control Panel
.
The SMART Board Control Panel opens.
2. On the
Boards
tab, press the
Advanced
button.
The
Edit Advanced Board Settings
dialog box opens.
3. Press the
DViT Settings
tab.
4. Press the
Calibrate
button.
The four-point calibration screen appears.
5. Press and hold your finger on the center of each target until the target moves.
After you press the final target, a message appears, followed immediately by the orientation
screen.
6. Complete the orientation procedure.
7. Press
OK
.
The 2000i is now ready for use.
Connecting a Guest Laptop
You can connect and control a laptop presentation by touching the screen
only
if you:
•
purchase and install the X-Port 20 switch option for the 2000i
•
install SMART Board software on the laptop
The X-Port 20 unit is an RS-232 serial switch for establishing a serial connection with the laptop,
enabling the laptop user to both write over top of the displayed laptop image with a pen tray stylus
and control the contents of the laptop by touching the screen. In addition, it allows you to switch
between the laptop, the resident computer and a VCR/DVD player using the Control Panel at the
front of the 2000i. If a guest laptop requires a USB connection to the 2000i, purchase the optional
USB-ADP cable from SMART Technologies to convert USB to serial.
Complete instructions for installing the X-Port 20 switch and connecting a guest laptop are in the
X-Port 20 Switch Installation Guide
that comes with the X-Port 20 option kit.
Summary of Contents for 2000i-DVS
Page 1: ...Interactive Whiteboard Guide Installation ...
Page 8: ......