Smart view IC-712-IAUR, User Manual, Page: 1 / 2

KVM
SWITCH
(IC-712-IAUR)
(IC-714-IAUR)
USER MANUAL
V1.0
IC-712-IAUR
IC-714-IAUR
Package Contents –
ƒ
1 Smart View IC-712-IAUR or IC-714-IAUR KVM
Switch
ƒ
1 User Manual
Please contact your vendor if anything is missed.
Features
ƒ
Controls PCs with one USB keyboard, USB mouse and
monitor respectively
ƒ
Supports USB 1.0, 1.1, 2.0 specification compliant and
supports UHCI, OHCI & EHCI host controller
ƒ
Supports USB Boot protocol & Wakeup Devices
ƒ
Supports speaker & microphone
ƒ
Supports the Windows, Linux and Macintosh
ƒ
Supports Microsoft IntelliPoint 5.0 drivers & Logitech
SetPoint Driver (Except MX5500, Logic)
ƒ
Superior video quality - Up to 1920 x 1440, DDC, DDC2,
DDC2B, DDC2AB, 200MHz
ƒ
3 ways for PC selection -- Push-button switch or hot key
or mouse clicking
ƒ
Easy to install--No software required
ƒ
Hot Pluggable
Specifications
Function IC-712-IAUR IC-714-IAUR
PC Connectors 2 4
Port Selection
Push-button Switch / Hot Key
/ Mouse Clicking
On Line 2 4
LEDs
Selected 2 4
Console Port 2x USB A-Type Connector
-Keyboard,
Mouse
CPU Port 2x USB B-Type 4x USB B-Type
Console Port 1x HD-15 Female (Std. VGA/SVGA)
Connector
-Monitor
CPU Port
2x HD-15 Male
(Std. VGA/SVGA)
4x HD-15 Male
(Std. VGA/SVGA)
Console Port 1 x Audio, Microphone Connector
-Audio,Mic.
(Jack)
CPU Port 2 x Audio, Mic. 4 x Audio, Mic.
VGA Resolution
1920x1440 (Max.), DDC, DDC2,
DDC2B, DDC2AB, 200MHz
Power Adapter DC 9V 300mA (Min.) spare
Scan Interval 5 sec ~ 30 sec
Housing Metal
Weight 469 g 660 g
Dimensions (LxWxH) 130x76x42 mm 200x76X42 mm
Hardware Requirements
Required specifications
Console
One highest resolution VGA, SVGA or Multisync monitor
One USB mouse
One USB keyboard
One pair of speakers.
One microphone.
PC
One VGA, SVGA or Multisync card
One USB port
One audio jack port.
One microphone port.
Cable Smart View custom cables or equivalent
-1-
Appearance
Front View
1. Push-button Switches (Manual type)
2. Port LEDs
3. Console Keyboard and Mouse Connectors
Rear View
1. Console Monitor, Speaker and Microphone
Connectors
2. CPU Port Connectors
Installation
Before the installation, make sure the peripherals of all
PCs are grounded properly and turned off.
1. Connect the monitor, keyboard and mouse with the
Console Port Connectors.
2. Use the recommended extension cables to connect
the PCs with the CPU Ports of KVM Switch.
3. Turn on the PCs.
-2-