General Description
Operation
Smart Temp
The SMT-101 is programmable heating only thermostat
designed for gas heating or Hydronic heating systems. It is
easy to use and install and by following these instructions
you will get many years of trouble free service from this
thermostat.
Setting the Clock
Your SMT-101 has a real time clock that must be set if it is to
control your heating system accurately.
Setting the clock is a very simple process
Step 1
Press button 2 - Clock set, the current hour will flash in the
LCD. Use the Temp +/- (buttons 6 & 7) to set the correct hour.
Step 2
Tap the Clock button again and now the minute flashes.
Again use the temp +/- buttons to set the current minute.
Step 3
Tap the clock button again and now the day of the week
flashes. Adjust to the correct day with the temp +/- buttons.
The Clock is now set.
Programming
As demonstrated above when setting the clock, using your
SMT-101 thermostat is an easy and intuitive process,
setting your thermostat 5+1+1 day program is equally as
simple as setting the clock.
The, SMT-101 has 4 daily schedules, These are numbered
one through four and have a graphic icon associated with
them.
1 - Wake. This is typically the temperature you wish
wake to in the mornings.
2- Leave. This is the temperature you wish while
you are away from your home at work for example.
3 - Return. This is the temperature you wish to
have when you return home at the end of the day.
4- Sleep. This is the temperature you wish you
home to remain at nights while you sleep.
Each of the 4 events will last until the next event arrives to
override it. This way you have 24 hours of programmable
comfort.
e
l
b
a
t
r
o
f
m
o
C
e
f
i
L
g
n
i
k
a
M
SMT-101
Heat only programmable thermostat
Instruction Manual
7
6
4
3
2
1
5
1 - On / Off - press to turn thermostat on and off.
2 - Clock - press to set clock or advance vacation timer.
3 - Program - press to enter program mode or to activate vacation hold.
4 - Return - exits programming functions and holds program.
5 - Reset - use a paperclip to reset thermostat back to factory settings.
5 - Up - Increase set temperature or value in programming
6 - down - Reduce set temperature or value in programming
These are the simple steps required to Program your SMT-101.
Step 1
Ensure the SMT-101 has been switch on.
Step 2
Press the “P” (program) button once. The LCD will show
Monday through Friday flashing at the top of the LCD indicating
that you are now programming the weekday temperature
settings. The wake symbol will show in the LCD.
Step 3
Use the temperature up or down button to set the “Wake” time
your desired value.
Step 4
Tap the Clock button and now the set temperature flashes in the
LCD. Again use the temperature up / down button to set your
desired temperature that you require to commence at the time
you previously set in step 3 above. Your SMT1-101 will turn your
heating on or off as required to maintain this temperature. This
set temperature will remain active until the program 2 time
arrives where program 2 temperature will be active.
Step 5
Tap the “P” again and now the time flashes for the weekday
event 2. Again set the event 2 time with the temp +/- buttons and
change to the event 2 temperature by tapping the clock button.
Repeat this procedure for the event 3 & 4 for the weekdays, then
the 4 events for Saturday and Sunday.
Remember - each event temperature will be maintained until
the following event overrides
