3
|
FRU-20-01032-20
– REPLACING THE LAMP ON YOUR SMART TABLE ST230I
–
To prevent premature lamp failure or exposure to mercury, always handle
the fragile lamp assembly with care. Use gloves when touching the lamp.
Do not touch the lamp with your fingers.
–
Recycle or dispose of the lamp as hazardous waste, in accordance with
local regulations.
Disconnecting the Cables and Vent Hose
Before you can remove the projector from the mounting bracket, you must disconnect
the cables and vent hose from the projector.
To disconnect the
cables and vent hose
1. Turn off the SMART Table and wait for it to completely shut down.
2. Disconnect the SMART Table’s power cord from the wall.
3. Wait 30 minutes for the projector to completely cool.
4. Remove the SMART Table door opposite the power
button. This door provides the
most direct access to the projector.