Smart Technologies SMART Response 2011 User Manual Download

Page: 115 / 122

Other troubleshooting tips

Symptom/observation

Action/remedy

When you export SMART Response

question set results from a SMART

Notebook file using the CSV

command, fractions change to dates.

In your exported results, change the exported dates to

fractions, add a space before each fraction and convert the

month to its numerical value. The converted month is the

fraction’s numerator, and the day is the denominator.

Your computer doesn’t recognize

SMART Response software, and the

receiver’s Status LED light remains

solid red.

Remove the SMART Response hardware drivers on your

computer, and then reconnect the receiver following the

instructions in

The SMART Response System Receiver

Doesn't Work

(smarttech.com/kb/115401)

The receiver's Status LED flashes red

when SMART Response software is in

CE or VE mode.

This is normal. When SMART Response software is in a

mode that doesn't require a receiver, the software doesn't

start the hardware drivers.

Responses from students don’t appear

in SMART Notebook reports.

Wait at least 10 seconds after the last student responds

before you stop a question set.

Additional SMART Response

receivers don’t connect to the network

when you install more than one

receiver on your computer.

Disconnect the additional receiver’s USB plug to resume
normal operation. Disconnect and reconnect the first
receiver’s USB plug if it doesn’t work, or if the Status light
turns red.

N O T E

Installing more than one receiver affects your computer’s
performance and doesn’t increase your reception.

C H A P T E R 5

Maintaining your SMART Response system

109

Summary of Contents for SMART Response 2011



























































































































Search results

Summary of Contents for SMART Response 2011

Reviews:

Related manuals for SMART Response 2011

Brands by name

Popular brands

Smart Technologies SMART Response 2011, User Manual

Search results

Summary of Contents for SMART Response 2011

Reviews:

Related manuals for SMART Response 2011

Brands by name

Popular brands