Smart Technologies SMART Board V280, Installation And User Manual

Page: 55 / 94

45 | MAINTENANCE AND TROUBLESHOOTING
Preventing Damage to Your SMART Board V280 Interactive
Whiteboard’s Writing Surface
CAUTIONS
• Your SMART Board V280 interactive whiteboard is not a dry-erase product.
Do not use dry-erase or permanent markers on its surface.
• Do not use harsh chemicals or abrasive cleaners on your interactive
whiteboard.
Your SMART Board interactive whiteboard is durable. However, take care to prevent
damage to the screen and other parts of your product.
• Don’t touch the screen with sharp or pointed objects.
• Don’t leave adhesive tape on the writing surface for extended periods of time.
• Don’t set up and use your interactive whiteboard in an area with excessive levels
of dust, humidity or smoke.
Cleaning Your Interactive Whiteboard
IMPORTANT
• Before you clean your interactive whiteboard, shut down or disconnect
the connected computer.
• To view dirt or streaks more easily, set your projector to standby (lamp off)
mode.
With proper care, your SMART Board interactive whiteboard will provide years
of trouble-free service. Follow these tips to keep your interactive whiteboard clean.
• To clean dust, dirt and finger grease, wipe the writing surface with a damp cloth
or sponge. Use mild soap, if required.
• If ink is accidentally used on your interactive whiteboard, remove the ink as soon
as possible. Ink becomes more difficult to remove the longer it stays on the
display surface.
• Cover ink stains with Sanford Expo® Whiteboard Cleaner ( not low-odor
whiteboard cleaner), and then rub the surface clean with paper towels.