4
SMART Board Software 9.5 Administration
Installing Notebook Software and Content to a Network Server
You can add the NOTEBOOK_ONLY and INSTALLDIR properties to the command to silently
install Notebook software, including Help, Spell Checker, Language and Gallery Sampler content
files to a specified network folder. For example:
mssiexec /i
"
Path to .msi
\SMART Board Software.msi
"
NOTEBOOK_ONLY=1
INSTALLDIR=
"
UNC path
"
/q
If you run the same command line on all computers, using the same network path, all users can
share the installed files.
NOTES
•
This command doesn’t install SMART Board software.
•
This command won’t install language packs.
•
You must use the command on all users' computers to update their registries properly. Do not
create a shortcut to the Notebook executable file to install the software onto a user's computer.
•
Because all users see the installation as "their own", and can add or remove content without
the other users knowledge or control, network administrators should make the network folders
read-only to allow multiple access. This also protects the content folders from accidental
removal if one of the users uninstalls their SMART Board software. To create Team Content
folders, see page 23.
Installing without Print Capture
Occasionally, Notebook software's print capture driver conflicts with other software on the
computer. You can use the following customized command to install SMART Board software
without the print capture driver:
msiexec /i
"
Path to .msi
\SMART Board Software.msi
"
SKIP_PRINTCAP=1
