Silent Removal of Earlier SMART Board Software Versions
7
Removing SMART Board Software 8.x
SMART used the
Install Shield
installation utility to install SMART Board software versions 8.x. To
remove these versions of software silently, you must create a
setup.iss
file.
Before you can perform the following procedures, you must obtain the product code for your
version of SMART Board software. Refer to the following table for the
ProductCode
value to use
for these versions of software:
NOTE:
Include the braces—"{" and "}"—when using a ProductCode in the following commands.
You only need to create the initial
setup.iss
file once. You can then use this
setup.iss
file to
remove the same version of SMART Board software from other computers on your network.
1. Check the version of SMART Board software that are installed on your computers. Refer to the
table above to identify the product code you must use in the following commands.
2. Click
Start > Run
and type
CMD
into the
Open
field.
A DOS window opens.
3. Type
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /M
ProductCode
/l1033 /r /z-AddRemove -RemoveReg
and click
OK
.
This command removes the SMART Board software and creates a
setup.iss
file in the root of
the
Windows
folder.
4. Place the
setup.iss
file on a network server where all computers can access it.
1. Go to each computer and click
Start > Run
and type
CMD
into the
Open
field.
A DOS window opens.
2. Type
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /M
ProductCode
/l1033 /s /z-AddRemove -RemoveReg /
f1
"path to the setup.iss file
\setup.iss" /f2"
destination path for the
uninstall log file
\uninst.log"
and click
OK
.
SMART Board
Software Version
ProductCode
8.0.0
{7823065C-AA64-425D-A9A3-18BF7B99E944}
8.0.1
{F414173A-7BE1-46C6-811A-51277A4D9E7B}
8.1.0
{155FBC4E-CF09-4698-961B-DF9787E6B8B8}
8.1.1
{7AD771BB-B681-4659-B7FA-223FCB1FDF56}
8.1.2
{55C574CA-8D71-46F1-9897-98DAE55C0394}
8.1.3
{10D2A154-D221-4455-8426-E67D12C092F9}
8.1.4
{41CEFD25-0D33-44EA-A19C-5A1EBABFC041}
To create the silent removal file
To remove SMART Board software 8.x
