6
Silent Removal of Earlier SMART Board Software Versions
You only need to create the initial
setup.iss
file once. You can then use this
setup.iss
file to
remove the same version of SMART Board software from other computers on your network.
1. Check the version of SMART Board software that are installed on your computers. Refer to the
table above to identify the GUID you must use in the following commands.
2. Click
Start > Run
and type
CMD
into the
Open
field.
A DOS window opens.
3. Type:
RunDll32 C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\0701\Intel32
\Ctor.dll,LaunchSetup "C:\Program Files\InstallShield Installation
Information\
GUID
\setup.exe" /r -l0x9 --AddRemove
and click
OK
.
This command removes SMART Board software and creates a
setup.iss
file in the root of the
Windows
folder.
4. Place the
setup.iss
file on a network server where all computers can access it.
1. Go to each computer and click
Start > Run
and type
CMD
into the
Open
field.
A DOS window opens.
2. Type:
RunDll32 C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\0701\Intel32
\Ctor.dll,LaunchSetup "C:\Program Files\InstallShield Installation
Information\
GUID
\setup.exe" /s -l0x9 --AddRemove /f1
"path to the
setup.iss file
\setup.iss" /f2
"destination path for the uninstall log
file
\setup.log"
and click
OK
.
To create the silent removal file
To remove SMART Board software 7.x
