Smart Technologies SMART Board 800 Series Configuration And User'S Manual Download Page 16

Page: 16 / 110

I M P O R T A N T

The SMART Meeting Pro software on the cable is compatible with only Windows® operating

systems.

Ensure that Autoplay is enabled on your computer before you connect the cable. See the

SMART Support website (

smarttech.com/support

) for additional information.

If you are using a laptop that doesn’t have SMART Meeting Pro software installed, connect the laptop

to the interactive whiteboard using your SMART GoWire cable. The SMART Meeting Pro icon
appears in the notification area on your laptop once you connect the cable.

CAT 5 USB extender

The CAT 5 USB extender (Part No.

SBX800-CAT5-XT) enables you to connect

your interactive whiteboard to a computer up

to 50' (15 m) away using a Cat 5, Cat 5e or

Cat 6 cable (not included).

Optional accessories

RCA connector pod

The RCA connector pod is an optional accessory for the SMART Board 800ixe-SMP

interactive whiteboard system with appliance. Refer to the

Composite video panel

(SBX8-RCA) for SMART Board 800i5e and 800iXe interactive whiteboard systems

installation guide

(

smarttech.com/kb/158170

) for more information on the RCA

connector pod.

The RCA connector pod includes two RCA jacks for dual-channel audio input and one for composite

video input. You can use the RCA connector pod to connect DVD/Blu-ray players and similar devices

(see

Connecting peripheral sources and outputs

on page 43).

Purchase this item from your authorized SMART reseller.

C H A P T E R 1

About your interactive whiteboard system

Summary of Contents for SMART Board 800 Series















































































































Search results

Summary of Contents for SMART Board 800 Series

Reviews:

Related manuals for SMART Board 800 Series

Brands by name

Popular brands

Smart Technologies SMART Board 800 Series, Configuration And User'S Manual

Search results

Summary of Contents for SMART Board 800 Series

Reviews:

Related manuals for SMART Board 800 Series

Brands by name

Popular brands